Degreasing Sintering Modular Furnace
  • echnical Parameters
    Degreasing Furnace(A Furnace)
    Unit Type GTB(S)-27/31/9
    Maximum temperature 800℃
    Normal temperature 600℃
    Temperature Control Accuracy
    ±1.0℃,imported single loop intelligent temperature controller: P, I, D parameters self-tuning; overheat, under-heat, open circuit power-off alarm protection.
    Number of Temperature Zones
    9 temperature zones
    Number of temperature control points
    9; 7 zones in heating phase, 7 points of temperature controlling; 1 zone in constant-temperature phase, 1 point of temperature controlling; 1 zone in cooling phase, 1 point of temperature controlling.
    Main thruster hydrocylinder thrust
    Thrust-weight ratio ≤ 3.5 T
    Main thruster’s working speed 00~400mm/h continuously adjustable
    Installed Power ≦125KW
    Sintering Furnace (B Furnace)
    Unit Type GTB(X)-27/31/17
    Maximum temperature 1700℃
    Normal temperature 1600℃
    Temperature Control Accuracy
    ±1.0℃,imported single loop intelligent temperature controller: P ,I, D parameters self-tuning; overheat, under-heat, open circuit power-off alarm protection.
    Number of Temperature Zones 12 temperature zones
    Number of temperature control points 17
    Main thruster hydrocylinder thrust
    Thrust-weight ratio ≤3.5 T
    Main thruster’s working speed 300~700mm/h continuously adjustable
    Installed Power 240KW

    ceramic sintering furnace manufacturers ceramic sintering furnace manufacturers
    Push sintering furnace Push sintering furnace
    catalytic debinding furnace catalytic debinding furnace
    CIM degreasing CIM degreasing


Witaj, nieznajomy!

Wygląda na to, że jesteś tutaj nowy. Jeśli chcesz wziąć udział, należy kliknąć jeden z tych przycisków!